Home Message Committee Program Schedule Keynote Papers Technical Papers


Paper ID


Material Science


Page no.



09


A Green in Situ Synthesis of Zinc Oxide Nanoparticles on a Cotton Fabric Using Orange Peel Extract to Create a Functional Textile with Enhanced Physical Properties

Swapna Biswas and Avishek Ghosh

667


43


Design and Fabrication of a Cost-Effective Rotating Beam Fatigue Testing Machine for Aluminum, Mild Steel, Cast Iron, and Stainless Steel.

K M Mahfuzur Rahman

673


55


The Potential of Waste Eggshells Used in the Ceramic Industry: Enhancing Morphological, Structural, and Mechanical Properties of Whiteware Body Prepared through the Solid-State Sintering Process

Md. Mosiul Haque1, Md. Lael Hasan, Md. Sagor Ahmed, Md. Manwar Hossain

682


57


Manufacturing and Characterization of Recycled Plaster of Paris from Waste Industrial Molds: Comparison of the Physical and Mechanical Properties with Pure Plaster of Paris at Distinct Drying Temperatures

Md. Estabrak Ahammod Sakib, Hridoy Roy, Md. Lael Hasan1, Rial Dhar

688


84


Replacement of CaO by Recycled Bone Ash in Whitewares

Abdullah Al Mahmood, Md. Minhajul Islam, Ayaz Rahman Nadib, Md. Bodiul Islam

694


87


Assessment of physical and mechanical properties of ceramic tiles incorporating Coconut Coir Ash (CCA)

Jahidul Alam Tanvir, Md. Mosharaf Hossain, Shaadnan Bin Syed

701


90


Influence of Moisture Diffusion on the Mechanical Properties of JUCO/Carbon Epoxy Composites: An Experimental and FEM Evaluation

Nadim Mahmood Nayeem, Md. Foisal Hossain, Muhammed Sohel Rana, Md. Shafiul Ferdous

707


93


Synthesis and investigation of frequency-dependent dielectric behavior in potassium, strontium, and niobium-doped and co-doped barium titanate ceramics

Mahir Amer Mishul, Md. Mosharaf Hossain, Redowan Ahmed, Shaadnan Bin Syed, Tasnim Mouri, Md. Wahidur Rashid and Md. Jahidul Haque

713


110


Upcycling Ceramic Waste for Sustainable Tile Production

Sadia Samanta, Mst. Esmotara Begum,Naushin Ferdaus, Sadia Afrin, Golam Mortuza Nion, Rifa Tasnim

717


113


Mechanical Properties of Gerbera Stem Inspired Dodecagonal Structures

Ummul Wara Zinatunnesa, Samin Yasar Saad, Md. Abdul Kader, Md Mahamudul Hasan Pranto, Md Abdul Wares

727


115


Numerical Analysis and fabrication of Cupric Oxide-Based Solar Cells

Fahmida Naznin Ritu, Jannatul Mauya, A.K.M. Ahsanul Habib, Md. Aminul Islam

733


121


Waste sawdust incorporated starch/fiber composite for packaging

Md. Sidratul Montaha Hossain, Z. M. Taif Al Hossain, Shaheed Al Magfur

742


130


Impact of Chemical Treatment on Diffusion Mechanism and Mechanical Strength in Acidic Medium (pH 3) of Banana Fiber Composites

Anoy Chakraborty, Md Foisal Hossain, Muhammed Sohel Rana, Md Shafiul Ferdous

748


164


Atomistic Investigation of Mechanical Properties of Metals Reinforced with Central and Auxiliary Voids

Mezbah Ahmed Tusar, Anshu Raj, M. Abrar Muhit, Abrar Faiyad

754


206


A Comprehensive Review on The Enhancement of Photocatalytic Activities of ZrO2 Nanoparticle for Hydrogen Production and Dye Degradation by Introducing Doping, Co-doping and Composite Forming

Sadia Ahamed Mim, Riad Hasan, S.M.Nasim Rokon

759


215


A Comprehensive Review on The Effect of Doping and Co-doping onto Optical and Electrical Properties of ZnO Thin Film as P Type TCO in Various Optoelectronic Applications

Sadia Ahamed Mim,Adiba Tarannum,S.M.Nasim Rokon

766


236


Mechanical Behavior Prediction of Carbon Fiber Reinforced Polymer Through ANSYS 21 Modeling

Ehasanul Islam Rafi, Chaitanya Roy Chowdhury, Md. Jafrul Hassan, Anik Molla, Hriday Kumar Gharamy, Md. Rokunuzzaman

773


258


Integration of Smart Materials: Enhancing Concrete Durability through Bacterial Solutions

Liton Chandra Das, Sraboni Das

778


264


A Numerical Study of Thermal Conductivity in Polypropylene Composites: Exploring the Synergy of Solid Glass Beads and Ceramic Beads as Fillers

Pappu Sutro Dhar, Asif Afsar, HM Toufik Ahmed Zisan

784


268


Study of morphological and antimicrobial analysis of green synthesized Cu-doped Co-Zn oxide nanoparticles using Mikania micrantha (leaf) extract

Jahidul Alam Tanvir, Md. Mosiul Haque, Shaadnan Bin Syed, Zahid Hasan

790


282


Removal of Zn2+ From Aqueous Solution Using Chicken Eggshell As Bioflocculant

Chaitee Paul, Sajal Chandra Banik, Md Al-Mubin Akhanjee

796


292


Comparative Study of ZnO Nanoparticles: Experimental Evaluation and Density Functional Theory Predictions of Electronic and Optical Properties

Md. Didarul Islam, Md. Jahidul Islam, and M.E. Hoque

802


296


Synthesis of Bio-Composite Phase Change Material Using Bioderived Graphitic Biochar for Enhanced Thermal Properties

G.M. Musfiq Ismam, Faisal Ahmed Naiem and Mohammad Shahed Hasan Khan Tushar

807


304


Optimization of Electron Transport Layer (ETL), Hole Transport Layer (HTL), and Absorber Material for Enhancing Efficiency of SnS-Based Solar Cells

Kristy Progya Biswas, Tabassum Fardous Nitu, Md. Nurul Islam

814


335


Identification and Analysis of TiO2 Nanoparticles Coated with Polyethylene Glycol for Use in A Drug Delivery System

Safin Tanjim Hossain, Parthib Das, Tuba Khan1, Uday Das

820


388


Evaluation and Characterization of Polyhydroxyalkanoates (PHAs) from Renewable Resources

Joyee Saha, Titly Ahmed, Lina Rafi Taposhi and Dr. Md Salatul Islam Mozumder

825


409


Green Synthesis of Magnetite Nanoparticles and Study of Its Morphological, Structural, and Magnetic Properties

Mashuk Jahir , Sneha Das Puza, Umme Salma Mst. Mahmuda

831


421


Green Synthesis of Carbon Nanomaterials Using Lemon Peel, Sugar Cane Bagasse, and Honey: A Comparative Study

Mohammod Tasbi Khan, Taufique Sami, Sadia Siddika

837


447


Formulation of Glass-Ceramic Glaze from Recycled Glass Waste to Enhance the Mechanical, thermal , Optical and Chemical Properties of Ceramic Tiles

M. Golam Mortuza Nion, Hasnat Jahan Sumona, M.S. Rahman

842


450


Influence of Alkali Treatment (With and Without Tension) on the Tensile Properties of Unidirectional (UD) Jute Polyester Composites

Ranajit Kumar Nag, Andy Long, Michael J Clifford

848


485


GEOMETRICAL EFFECTS OF PITTING CORROSION ON RELIABILITY OF UNSTIFFENED SHIP PANEL

Shahan Malek Usham, Muhammad Rabiul Islam

854


500


Sustainable Approaches to Noise Control Using Waste Materials

Mohammad Ataur Rahman , Shajjadur Rahman Shajid , Dr. Shahajada Mahmudul Hasan

860


506


Effect of Cutting Parameters and Machining Environment in Surface Roughness in hardened Steel (52HRC) Using Design of Experiment

Masud Rana Khandker, M. A. Moudood and Sirajul Karim Chaudhury

867


507


An Investigation on Chip Morphology of Hardened Steel (52 HRC) During Hard Turning

Masud Rana Khandker, M. A. Moudood, Sirajul Karim Chaudhury

873


508


Experimental Investigation of the Mechanical Properties of Jute Fiber Reinforced Composites

Masud Rana Khandker, M. A. Moudood, Sirajul Karim Chaudhury, Nazia Muhsin, Nayeem Md. Lutful Huq

879